USB 3.2 Cloner and Dock for M2 + NVMe + SATA Sandberg
USB 3.2 Cloner and Dock for M2 + NVMe + SATA
Cena 68.99 €
S. R. P. (ieteiktā mazumtirdzniecības cena) bez PVN:   57.02 €

Preces Nr.: 136-49
EAN: 5705730136498

Sandberg USB 3.2 Cloner & Dock for M2 + NVMe + SATA nodrošina vienkāršu tradicionālo SSD tipa un NVMe M.2 SSD 3,5"/2,5" SATA cieto disku ārējo savienojumu dažādos izmēros. Ievietojiet disku šajā parocīgajā mazajā dokstacijā, izvairoties no skapju un skrūvju izmantošanas. Tas ir viegli savienojams ar datoru, izmantojot USB-A vai USB-C portu, un darbojas nekavējoties. Izmantojot USB 3.2 interfeisu, jūs iegūstat ātru pārsūtīšanas ātrumu līdz 10 Gbps. Varat arī klonēt viena cietā diska saturu uz citu pilnīgi bez datora savienojuma. Klonēšanas funkcija darbojas divvirzienu veidā.

Clone and dock in one
Instant hard disk cloning
2 hard disks to a single USB port


New Tek Reviews:

»After playing around with this Sandberg’s USB 3.2 Cloner and Dock for M2 + NVMe enclosure for a couple of weeks and installing a three different drives on three different operating systems, I can say it passes my inspection and is a very well made device. We were even able to image a loaded drive to another system using third-party software (Acronis True Image) and make that system bootable. That is to say, the USB 3.2 Cloner and Dock for M2 + NVMe enclosure does everything you’d expect it to, with no disappointments. It also comes with 5 years warranty.«

Practical Electronics:

»I've tried it and certainly love it. I just wish I hadn't previously wasted my money on a multi-bay HDD dock that looks good but has corrupted some of my HDDs, and also on two-bay HDD docks, which are far less use than the much neater Sandberg tool.«

indie-eye.it:

»We tested the product directly and were favorably impressed. The ease of use and assembly of hard drives is equal to the effectiveness of the cloning process.«

Gameelite:

»Sandberg's new docking station can not only copy data but also clone SATA and M.2 disks. Easy to use. Suitable for both cloning and backup. Fairly low price.«

The Fox Report:

»I've tried it and certainly love it. «

Newtekreviews.com:

»It passes my inspection and is a very well made device. The item does everything you’d expect it to, with no disappointments. It also comes with 5 years warranty.«

indie-eye.it:

»We tested the product directly and were favorably impressed. The ease of use and assembly of hard drives is equal to the effectiveness of the cloning process.«

Datormagazin:

»The solution is extremely easy to use and works perfectly.«

  • Support offline clone:
  • (1)3.5"/2.5" SATA to NVMe M.2
  • (2)NVMe M.2 to 3.5"/2.5" SATA
  • USB3.2 Gen2 superspeed up to 10Gbps (backward compatible with older standards)
  • Transfer speed max: SATA 6 Gpbs, M.2/NVMe 10 Gpbs
  • SSD types supported: M.2, NVMe, M Key
  • SSD sizes supported: 2230 / 2240 / 2260 / 2280
  • Chipset: JMS581D
  • LED indicator for power and data access
  • Offline clone, two-way clone (NVMe to SATA, SATA to NVMe)
  • Max. capacity supported 3.5" HDD: 24TB
  • Max. capacity supported 2.5" HDD: 8TB
  • Max. capacity supported SSD: 4TB
  • Max. capacity supported M.2: 4TB

Saderīgs ar:

  • Windows 11
  • Windows 10
  • Windows 8
  • Windows 7
  • MacOS
  • Linux

Iepakojuma informācija

  • 1 Sandberg USB 3.2 Cloner & Dock for M2 + NVMe + SATA
  • 1 Power Supply output DC 12V/3A, input 230V AC, EU connector
  • 1 USB-C to USB-A/C connecting cable, 80 cm
  • 1 Quick guide
Info

Izmēri

Produkts Paka
Augstums 10.84 cm 13.5 cm
Platums 2.41 cm 16.9 cm
Dziļums 4.43 cm 5.5 cm
Svars 100 g 120 g
136-49 USB 3.2 Cloner and Dock for M2 + NVMe + SATA

Contact the Sandberg Helpdesk

If you cannot find answers to your questions about your product, please contact the Sandberg Helpdesk and get a quick response on weekdays:

BUJ

When I try to clone SATA to NVMe or vice versa by holding the clone button down for 3 seconds, all 4 percentage LEDs start to flash a lot, but then it's as if nothing happens. There is no indication that cloning has started.

Hold the clone button down for 3-5 seconds and release once all LEDs are on (25%, 50%, 75%, 100%). Press the button quickly once more and cloning will start. Once all LEDs have gone out again, cloning is complete. Remember to switch off the cloner before disconnecting HDD/SSD.

Videoklipi
Atslēgts, ja nepiekrītat Funkcionālie sīkfaili.

USB 3.2 Cloner and Dock for M2 + NVMe + SATA tika minēts mūsu preses centrā: